15m3/hr Aluminum-zinc Plate Closed Cooling Tower

  Product Description 

Name:	15m³/hr Aluminum-zinc Plate Closed Cooling Tower
Type:	AFC-15T
Unit:	Set
Material:	Stainless Steel
Usage:	For induction furnace, quench bath,tan, central air-conditioning,hydraulic system, air compressor and so on.
Water flow rate:	15m3/hr
Cooling capacity:	75860Kcal/h(88.2kw)
Fan blowing rate:	24000m3/hr
Motor power	0.75kw(1.02hp) x 2
Spray pump flow	22m3/hr
Spray pump power	1.1kw(1.5hp)
Circulating Pump power	3kw(4.08hp)
Water in/out diameter	50mm(2.56")
Brand Name:	Aosua
Place of rigin:	Zhejiang,China
Minimum Order:	1 set
Packaging Details:	Spare parts packing with wooden case, 20 feet container, 40 feet container
Terms of payment:	TT
Supply Ability:	100 sets/month
Production date:	Within 30days

Closed Cooling Tower: Closed cooling towers are one of the methods of heat transfers. They are hybrids that pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protecting the working fluid from environmental exposure and contamination.   Application:  Closed cooling towers operate similar to open cooling towers, except that the heat load to be rejected is transferred from the process fluid to the ambient air through a heat exchange coil. This creates two separate fluid circuits an external circuit, in which spray water circulates over the coil and mixes with the outside air, and an internal circuit, in which the process fluid circulates inside the coil. The coil isolate the process fluid from the outside air, keeping it clean and contamination free. Heat is transferred from the internal circuit, through the coil to the spray water, and then to the atmosphere as a portion of the water evaporates.   Advantages:  Costs Less to purchase & operate, Less Total HP required, Green solution, open towers use an efficient, simple, and economical design. This is accomplished by combining heat rejection equipment with a heat exchanger in a closed Cooling Tower   More model for your choose       Packaging & Shipping       Our Services 1.Provide install video if necessary.
2.Quality guarantee is 12 months.
3.If it was proved due to the quality problem,we will bear all cost for replace during quality guarantee time.
4.Oversea technical guidance.   Company Information OUR FACTORY   OUR FACTORY
Established:2009
Employees: 11 - 50 People
No. of R&D Staff : 11 - 20 People
No. of QC Staff: 5 - 10 People
Management Certification: ISO 9001:2008
Main Markets: North America South America Eastern Asia Western Europe
Factory Size (Sq.meters): 3,000-5,000 square meters           FAQ 1)Q:Are you a factory or a trading company? A:cooling tower manufacturer with 50 works. 2)Q:What's your MOQ of this term? A:1 SET. 3)Q:Where is your Loading port? A:Ningbo and Shanghai port,China 4)Q:What's your company's available production capacity? A:200 SETS per month. 5)Q:How about the packing of this model? A:Spare parts packing with wooden case, 20 feet container, 40 feet container  

Contact us if you need more details on Closed Cooling Tower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Aluminum-zinc Plate Cooling Tower、15m3/hr Cooling Tower. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Closed Cooling Tower