Model No.: WT-600
2. The blade base and blade on the rotary roller can be disassembly .it is easy to clean and maintenance.
3. The rotary blade adopts "V" design. It can decrease the noise and decrease energy consumption.
4. Each rotary blade with 4 cutting knife edge, when the rotary blade is wear, it can be rotated to 90 degree, then the blade can continues use.
5. Each fixed blade with 2 cutting knife edge, when the fixed blade is wear, it can be rotated to 180 degree, then the blade can continues use.
6. The main axis is drive by gearbox, its running very stably, low noise and strong power.
7. The material push feeding system is hydraulic ways , ,its running very stably
8. The machine is controlled by PLC system ,.the blade can rotated in opposite direction ,and also can close automatic if something unexpected happen , with very high safety service
1. WT800 single shaft shredder
|2||Process target||Waste plastic|
|3||Size of feed mouth||700×650mm|
|4||Size of crushing chamber||624*680(W*L)|
|5||Diameter of rotator||225mm(effective length: 600mm)|
|6||Rotary speed for blade (rpm)||85rpm|
|8||Hardness of blade||HRC60|
|9||Qty of rotary blade||33pcs|
|10||Qty of fixed blade||2 sets|
|11||Wall thickness of crushing room||16mm|
|12||Material of crushing room||Q345B|
|13||Leg/frame of shredder||Q235B|
|14||Power of drive motor||AC22kw|
|15||Production capacity||300-500kg/hr(depend on different material)|
|16||Weight of the main machine||Around2500kg|
|Electric control Details|
|17||Motor protection standard||TP44|
|19||Brand of gearbox||Red-sun brand ,Made in china|
|20||Brand of bearing||NSK brand|
|23||Electric Relay||Siemens brand|
|25||Oil pump motor||AC2.2 KW|
|26||Max. Pressure of system||10MPa|
|27||Diameter of hydro-cylinder||80mm|
|28||Cooling type||Water cooling|
|29||Distance of pushing materials||600mm|
|30||Control system for forward and back||By PLC|
|31||Protecting system||Proximity switch|
|32||Size of the hole||20mm(can design according to customer requirement )|
|33||Thickness of net plate||10mm|
45 days since receiving advance payment.
Sea worthy packing
4. Technical documents
SIMI ENGINEERING LIMITED will offer you all necessary documents, e.g. general layout plan, electrical diagram and user manual after the contract is executed.
Contact us if you need more details on Shredder. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Single Shaft Shredder、Powerful Shredder. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Granulating & Recycling Series
Premium Related Products