High temperature 175 ton round cooling tower

Production Product Intoduce
Aosua round Counter Flow Cooling Tower is mainly composed by motor,fan,Sprinkler Head,filler,casing,basing and Air Intake Louver.

Aosua Round counter flow Cooling Tower has been technique corrected in the original basis.Not only match up high quality motor but also improve product’s material selection and technology.It make Aosua round counter flow cooling tower have more perfect users experience.

There are two types of round counter flow cooling tower heat resistant(GAB) and standard type(AB).

GAB is suitable when water inlet temperature over 55 C degree.AB is suitable when water inlet temperature under 55 C degree.

SPECIFICATIONS FOR 175 TON COOLING TOWER
Design Parameter	Type	Round Counter Flow Cooling Tower
	Model	AB-175
	Circular Water	m³/h	175
	Inlet/Outlet Temp	℃	37/32
	Setting/Wetbulb Temp	℃	31.5 /28
	Noise(16meters)	dB(A)	53
	Power Supply	V/Hz/P	380/50/3
	Drift Loss	%	≤0.01
	Evaporation Loss	%	≦0.83
		Pa	3
	Shipping/Operating Weight	KG	1310/2540
Fan Parameter	Fan Type	Axial-Flow
	Air Rate	m³/h	85000
	Fan Diamter	mm	1800
	Fan Blades	4
	Drive Type	Directly
	Power	kw	4
Main size	Max Dia Height Water Inlet/Outlet Dimater	mm	3600
	Height	mm	3670
	Water Inlet/Outlet Dimater	DN150/DN150
Material	Fan	ABS
	Fan stack/Casing	FRP
	Basin
		ABS
	Distributor Pipe	PVC
	Fill	PVC Fill
	Basin Support	Hot Galvaningzing Steel
	Water Inlet/Outlet Main Pipe	FRP
	Fill support	Galvanized Steel
	Motor Support	Galvanized Steel
	Ladder	Galvanized Steel
	Air inlet meshes	PVC
	Fastener	Stainless Steel
	Color	Cream-coloured

PVC Round Filler Material:PVC
Height:200mm/250mm/300mm
Thickness:0.3mm
Color:Black
Use temperature: 0-60 C 
Mesh Material：PVC Thickness：06-0.8mm Size：custom-made Tower Body Material：FRP Color：Beige 4KW Motor Material:Aluminum Power:4KW Voltage:380V(custom-made) Frequency:50HZ(custom-made) Speed:890 RPM 1800mm Aluminum Fan Diameter:1800mm Material:Aluminum Shaft:42mm 6" ABS Sprinkler Head Size:6"
Material:ABS Blades: 4

Other Size Product Related Products Round Type Cooling Tower Cooling tower is designed to economic and save water,it is the huge advance in industry.We take Fibre-reinforced plastic as the materials of cooling tower.it is light,low noise and high quality.It is widely used in plastic, electronics, food,textile,chemicals,packing industrial and so on.
Square Type Cooling Tower Cooling tower is the use of water and air contact, dispersed by evaporation industry or a kind of waste heat generated in refrigeration and Air Conditioning equipment.
Packing & Delivery Our Company Zhejiang Aoshuai Refrigeration Co., Ltd. In May 2011,AOSUA got ISO9001:2008,UKAS(United Kingdom Accreditation Service) and IAF(International Accreditation Forum)That same year become a membership of CTI(Cooling Technology Institute) and The Chinese Association Of Refrigeration.
AOSUA's powerful combination of financial strength and technical expertise has established the company as a recognized manufacturer of market-leading products on a worldwide basis.
Our Service 1.Provide install video if necessary.
2.Quality guarantee is 12 months.
3.If it was proved due to the quality problem,we will bear all cost for replace during quality guarantee time.
4.Oversea technical guidance.
5.Provide foundation drawing.
Certification Contact Us

Contact us if you need more details on Frp Cooling Tower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cooling Tower、Round Cooling Tower. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Round Cooling Tower